SATCON is a private Design, Engineering and Consultancy firm providing Prebid Engineering, Basic Engineering and Detail Engineering services for the Electrical and associated Civil, Structural and Automation systems of following type of projects:
Gas Insulated/Conventional indoor/outdoor substations from 11kV up to 400kV.
Overhead Transmission & distribution lines.
Electrical power distribution systems, Controls, Instrumentation and Automation systems of : Material Handling Plants (Coal/Iron) and misc. industrial projects like Steel Plants, Process Plants etc.
SATCON was established in the year 2004. At present it is providing design engineering services in various projects in India, Africa and Middle East countries. In many of its projects SATCON is providing their services as Contractor's Consultant which requires thorough engineering skill in order to optimize system and equipment.SATCONhas agreements with TOP DEVELOPMENT CONSULT, a Saudi Arabian engineering firm, ASAS ENGINEERING & PROJECT MANAGEMENT CONSULTANCY EST.,Abu Dhabi, ABI SMARTEK SERVICES LTD., Calgary, Canada and AHMIN TECHNOLOGY & POWER SYSTEMS LTD., Nigeria to provide technical support in design engineering services.
Single Line Diagram is one of the most important piece of drawing in a Project which describes the Power distribution philosophy, voltage step down or step up, equipment ratings, cable sizes, fault levels at various buses and protective relays provided at various voltage levels. Following type of drawings are generated for various projects :
Key SLD for EHV AIS substation projects.
Key SLD for EHV GIS substation projects.
Key SLD for HV/MV Indoor substation projects.
Key SLD of Thermal Power plants.
Protection and metering SLD for EHV AIS substation projects.
Protection and metering SLD for EHV GIS substation projects.
Protection and metering SLD for HV/MV Indoor substation projects.
Protection and metering SLD of Alternators.
SLD of LV Switchgear panels.
SLD of LV ACDB and DCDB panels.
SLD of MV/LV MCC panels.
Overall SLD of Lighting distribution in Large Plants.
SLD of LV Bay Marshalling Kiosks (BMK) for EHV switch yards.
SLD of P.F improvement Capacitor panels.
SLD of Emergency power supply from DG sets. 2016-05-01T16:07:53
We have the resources, machinery and expertise to carry out soil investigation, soil resistivity tests and CBR tests for substation plots and overhead line routes. We have already provided these services for substation projects of JSEB, SAIL-Bokaro, SBPDCL, Bihar.
We have experienced manpower, machinery and softwares to execute these works. Kindly send us an enquiry to enable us to submit an offer matching with your requirements. 2016-04-17T11:13:24
We evaluate techno-commercial bids of following systems, equipment and material or for EPC turn key bids, We do necessary correspondences with the bidders to take clarifications and bring all of them at same par. After evaluation, a technical evaluation report is sent to Client suggesting whose offers are technically most suitable with respect to the Project requirement. Offers of technically most suitable offers are then opened for price evaluation.
EHV/HV/MV/LV Circuit breakers, Isolators, CT, PT, CVT, LA.
Switch yard hardware, clamps, connectors, post & disc insulators.
Power and distribution transformers.
Earthing and lightning protection material.
Fiber optic and instrument cables.
LT switchgear and MCC panels.
Substation automation system.
Substation control & relay protection systems.
Lighting fixtures and small power sockets.
PLC & plant control desks.
Erection, testing and commissioning of plant and machinery.
Steel structural works.
We provide prebid engineering services for electrical, civil, structural, substation automation, HVAC, plant controls & automation systems, equipment and materials for Large industrial projects like EHV T&D substations, Indoor/outdoor industrial substations, EBOP of Thermal power plants, Material handling plants, Steel plants, process industries and misc. industries, factory sheds in India and abroad. We already have standardized formats in computer programs for doing these exercises in short time span. The estimated BOQ can be supplied at a nominal cost and within 7-15 days time. The activity is controlled by senior experienced Consultants and designers. Following input are required to carry out this activity :
Scope of work
Tender drawings 2016-04-17T11:39:44
We have executed survey of several substation plots and prepared topographical contour layout plan and elevation drawing of the plot in Autocad. Survey is done by Total station device.
We have experienced manpower, machinery and softwares to execute these works. Kindly send us an enquiry to enable us to submit an offer matching with your requirements.2016-04-17T10:46:33
We have the resources and expertise to carry out preliminary route survey, approval of route, detail route survey, soil investigation, soil resistivity test, pole/tower spotting, sag & tension calculations, pole/tower selection, conductor selection, route profile drawing, layout plan and elevation of the overhead line, structural design of different types of poles/towers for overhead lines upto 33kV.
We have experienced manpower and softwares to execute these works. Kindly send us an enquiry to enable us to submit an offer matching with your requirements.2016-04-17T10:38:22
Earthing of any electrical system is of high importance for safety of working personnel and to obtain system earth for relay tripping. Earthing system is designed as per IEEE-80/BS-7430/IS 3043/IE Rules/CBIP standard as applicable. We do earthing calculations either manually by Excel or by using softwares like ETAP and Cymgrid.
Lightning protection system of building and/or outdoor equipment shields them from direct lightning strike. The need for lightning protection system is first established by lightning protection risk assessment study as per IEC 62305 and then the zone of protection is calculated by using IEEE/IEC standards. We do these calculations manually by Excel.
We have experienced manpower and softwares to execute these works. Kindly send us an enquiry to enable us to submit an offer matching with your requirements.2016-04-02T14:51:41
Electrical system studies by softwares are essential for initial planning for any project. Based on Clients requirements and data collected from site/other disciplines (like mechanical) a software model of the power distribution network can be created in ETAP software to do the following studies :
Load flow study for Transformer sizing, Cable voltage drops and sizing, requirement of Capacitors for reactive power compensation.
Load flow study also helps in deciding voltage levels at different buses of the substation.
3 phase and earth fault (SLG, LLG) level calculations at different node points of the power distribution system.
Motor starting study for voltage drop during starting and normal running of the largest motor in a plant.
Protection coordination study for proper relay coordination with upstream breaker.
We have experienced manpower and softwares to execute these works. Kindly send us an enquiry to enable us to submit an offer matching with your requirements.2016-02-07T06:49:02
We offer the following Design Engineering services for 132kV Switchyard projects :
1. Topographical contour survey
2. Geotechnical investigation
3. Soil resistivity measurement
4. Electrical SLD, protections, metering, controls and indications
5. Survey drawings, Topographical contour layout drawings
6. Overall site layout plan drawings
7. Switchyard layout plan & elevation drawings
8. Indoor and outdoor Cable trench layout drawings
9. Earthing calculation, layout and earthing detail drawings
10. DSLP calculation and layout drawings
11. Control schematics and terminal plan drawings of bay marshalling kiosks
12. Cable schedule and interconnection diagram for Power and control cables
13. Technical specification of all equipment and materials
14. Lighting calculations, SLD and layout drawings
15. Bill of materials for cables, cable trays, racks, earthing, lightning protection and lighting systems
16. Short circuit force calculation for strung bus and rigid tubular bus 17. Fault level calculation
18. CT & VT sizing calculations
19. Battery and battery charger sizing calculations
20. Vendor drawing review
21. Civil drawings and calculations for foundations, cable trenches, culverts, drains, control bldg., DG room, Store shed, Security room, Switchyard panel room (AC Kiosk), pump house, fire water reservoir
22. GS structure drawings for gantry towers, beams and equipment supports
23. SCADA architecture diagram, Input-Output list, BOM of SCADA system
24. Schematic diagrams, Layout drawings, specifications and BOM for Fire detection and alarm system
25. Schematic diagrams, Layout drawings, specifications and BOM for HVAC system
We have experienced manpower and softwares to execute these works. Kindly send us an enquiry to enable us to submit an offer matching with your requirements.2016-02-05T13:36:49